The ICT-100A is a box with vertical arms supporting a toggle clamp. To perform in-circuit testing on a customized Printed Circuit Board (PCB), the ICT-100A hosts a custom-built Pogo Pin Cassette (PPC).
This is our most popular chassis and supports boards up to A5 (148mm x 210mm) in size.
Ingun ATS MA11 removable pogo pin cassette with 150mm x 240mm testable area. This kit requires additional hardware and assembly to be usable with a device under test. Fits inside the MA 2111 chassis.
Ingun ATS MA12 removable pogo pin cassette with 285mm x 240mm testable area. This kit requires additional hardware and assembly to be usable with a device under test. Fits inside the MA 2112 chassis.
If possible, place test points on the bottom of the PCBA with a diameter of 1mm and separation of centers of at least 2mm. If they need to be smaller or closer together, this can be accommodated with this additional service. This also allows for interfacing with the pins of thru-hole components using special pogo pin heads.
The pogo pin cassette (PPC) is custom-built to be compatible for your Device Under Test (DUT). It fits inside the ICT Chassis. Each PPC comes with a custom pressure plate.
The pogo pin cassette (PPC) is custom-built to be compatible for your Device Under Test (DUT). It fits inside the ICT Chassis. Each PPC comes with a custom pressure plate. For this version, the PPC is built per your schematic and layout of the PPC board.
Pogo Pin Cassette designed to fit into the Ingun MA2111 chassis which accommodates boards of approximately A5 size. We purchase the ATS kit from Ingun and add a custom PCBA that mates with the Production Line Tool via the standard connectors.
Pogo Pin Cassette designed to fit into the Ingun MA2112 chassis which accommodates boards of approximately A4 size. We purchase the ATS kit from Ingun and add a custom PCBA that mates with the Production Line Tool via the standard connectors.